Just how to Install a Plug for A electric garments Dryer

Related Articles

The plug on an electric dryer is optional, because, in several houses, the applying is hardwired into the home circuitry. Then you may need to install a plug — or pigtail — yourself if your house has a 240-volt receptacle for the dryer. The nationwide Electric Code has mandated grounded plugs on dryers since 1996, therefore modern pigtails have four cables in the place of three. Setting up a pigtail seems like a complicated task, but it is really an easy procedure that anybody can do. The pigtail cables have band lugs, and you also just connect these into the terminals that are appropriate the dryer.

Place the terminal that is electrical in the straight back of this dryer. It is frequently close to the flooring. Unscrew the panel address having a Philips screwdriver and take away it.

Note the colors for the terminal screws within the dryer. Two are brass, a person is silver and something is green. The brass terminals are hot, the silver is neutral plus the green one is for ground.

Unscrew one of several brass screws and insert it through the ring lug on either the black colored or red wire on the pigtail. asiame These two cables are both hot and therefore are interchangeable. Drive the screw back in the panel and tighten it to securely hold the wire. Connect one other hot cable to the other terminal within the same manner.

Link the white cable into the silver terminal and also the green cable to your terminal that is green. After the cables are linked, secure the pigtail to your dryer by feeding it through the wire that is built-in and tightening the clamp.

Fit the panel protect straight back on the machine. The wire should be routed through the notch provided for that function. Screw the address straight straight back on.

• Ask the Electrician: Wiring a Dryer Cord
• Acme Simple Tips To: How Exactly To Change a Dryer Power Cord

• Only a few dryers have pigtails. If you have to buy one, be sure it’s long enough to achieve the receptacle.
• When you have a mature dryer without a ground terminal, drill an opening when you look at the human anatomy of this device and link the floor cable into the device with a ground screw.
• You hardwire a dryer by after simply the procedure that is same. The actual only real distinctions are that you have to crimp regarding the band lugs yourself, together with ground wire is bare as opposed to green. Make sure the power is down before you are doing it.

Chris Deziel has a bachelor’s level in physics and a master’s degree in humanities. Besides having an abiding fascination with popular technology, Deziel was mixed up in home and building design trades since 1975. As being a landscape builder, he helped establish two farming businesses.